New underlayment
A new waterproof layer is installed slope to slope doubled or self-adhered where needed.
A roofer in Succasunna can replace a worn tile roof by removing the tile, repairing the deck, installing new underlayment and flashing, then relaying the sound tile or putting on new tile. Call (862) 453-8001 to reach a local roofer for tile roof replacement.
Replacing a tile roof is different from replacing a shingle roof, because the tile itself may still be good. Clay tile often lasts long enough to be relaid over new underlayment more than once. When the tile is brittle, badly eroded or no longer available, new tile goes on instead.
The steps are the same whether the tile is reused or new. Crews remove the tile, tear off the old underlayment, fix the deck and install fresh underlayment, flashing and battens before the tile returns. Most areas require a permit, and some require an inspection of the dry-in before tiling.
Expect some breakage. Old tile can crack when its fasteners are pulled, so matching spares are lined up before the job starts. It is worth asking how breakage is handled and how new tile will be blended in.
If the problem goes deeper than it first looked, a Succasunna roofer may also recommend tile roof installation or tile roof repair.
Looking for Succasunna tile roof replacement? Call (862) 453-8001 to reach a nearby roofing contractor.
Call nowThe goal is a new roof under tile that lasts as long as the tile on top.
Tiles are lifted in several places to judge the underlayment, and the tile itself is tested for brittleness before choosing between relay and new tile. Any sagging section is evaluated before the crew puts weight on it.
Tile is pulled course by course, sorted and stacked on the roof or on pallets, with broken pieces set aside. Work usually goes one section at a time so the house is never left open to weather.
Everything under the tile, from underlayment to battens to valley metal, is removed. The bare deck is checked, and rotted boards or delaminated sheets are replaced.
The roof is dried in with new underlayment and fitted with fresh flashing throughout. New battens and new bird stops go on before the tile.
The salvaged tile is relaid course by course with corrosion resistant fasteners, and new or salvaged tile fills any gaps. When the old tile is not reusable, new tile is installed over the new underlayment instead.
The ridge is finished, spare tile is left for future repairs and the heavy debris is hauled away. A final inspection closes out the permit.
A new waterproof layer is installed slope to slope doubled or self-adhered where needed.
The bare deck is repaired where needed so the new roof has a solid base.
Salvaged tile is relaid with new fasteners and finished with new ridge caps.
Every flashing is renewed sized for the tile profile.
All tile is removed and sound pieces are saved for relaying on the new roof.
When only the underlayment has failed, the fix is to replace that layer and put the same tile back on. The original underlayment on many roofs was a single layer of felt that dries out, cracks and tears after a few decades of heat under the tile. Modern options like self-adhered membranes and heavy synthetics are built to last far longer.
In Succasunna, a roofer replacing tile underlayment typically works one slope at a time, stacking tile on the next section over. New flashing and battens go in at the same time, since the old ones are usually as worn as the underlayment. The result is a roof that keeps its original look over a brand new waterproof layer.
With clay tile, the first question is whether the tile itself still has life left. Tile that is flaking or crumbling from freeze damage is replaced, and the rest is relaid. Where enough tile has failed, the roof may be redone in new clay with a matching profile.
For clay tile roof replacement in Succasunna, matching matters most on older homes, where the tile defines the look of the house. A common approach is to put original tile on the street side and blend replacements on the back slopes.
Tile roofs on older Succasunna homes commonly reach a point where the tile is fine but everything under it is worn out. From Succasunna to surrounding communities such as Ledgewood, Flanders, Landing and Netcong, the choice between relaying and new tile depends on the tile type and how it has weathered, which is why the assessment before replacement focuses on the layers you cannot see.
For tile roof replacement in Succasunna, NJ or nearby towns like Ledgewood, Flanders, Landing and Netcong, call (862) 453-8001 to reach a roofer who covers your street.
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Succasunna is busiest after a hard winter and before the next one.
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Local roofers see the same roofs and storm damage across Succasunna and nearby towns.
Ask the roofer about the cause, the options and the estimate before work starts.
More questions? Call (862) 453-8001
Clay and concrete tile roofs installed over the right underlayment, battens and flashing, so the tile and the layers under it age well together.
Learn moreTile roof repairs from a single cracked tile to relaying a leaking section, matched to the profile and color already on the roof.
Learn moreReplacing an aging roof with new underlayment, flashing, vents and roofing, so the house is dry for decades instead of seasons.
Learn moreTile roof inspections that count broken and slipped tiles, check the layers beneath and estimate how much life is left, with a written report of what needs attention now and what can wait.
Learn moreLooking for something else?
See all roofing servicesCall now for Succasunna tile roof replacement and help in the towns around it.